Triangle design shawl using wedge technique inspired by Hexagon blanket by Charity Windham. Charity and I talked about combining her wedge and my picots for a frilly garter ridge reversible shawl. This shawl is a generous size for larger sizes up to 76" wide from end to end! Cast on Edge is 53" and can be made smaller for smaller sizing needs.
Stitch gauge: 4 sts per inch x 8 rows per inch in garter stitch
Loom: 7/16" gauge loom to be single knit with at least 168 pegs. Loom used in sample Knitting Board 28" with peg extenders.
Alternate loom(s): Kiss Looms can adjust to appropriate guage. Be sure to swatch. Use Kiss Fine Gauge Fixed 2; set up with two 83 peg long sides and two 7 peg ends. Use 165 pegs (loom will be 180 pegs). For Martha Stewart (MS loom) use two kits; set up with four 36 peg straights, two 12 peg medium straights, and four 6 peg corners with pegs in all holes for 3/8" gauge. Cast on 189 pegs (192 pegs on loom).
Yarn: 800 yards medium weight (4) Red Heart Boutique Unforgettable color Petunia. 3 balls used in sample. 9.85 oz/280 grams finished weight.
Cast on: Picot CO 165 pegs. (starting on left working to right if right handed, Place removable Stich Marker on peg 1) http://youtu.be/MdtQZm9wUE0
Row 1: SL 1, P to marker (all odd rows will repeat this way.)
Row 2: HS 1 at marked peg & move marker 1 peg to right (do NOT work HS st), EW to peg 165, Cable CO 3, BO 3 to form picot (See notes below on details for Cable CO and BO). I like to have 3 st markers on pegs 166-168 to show where picots need to be added on even numbered rows. For less picots on edging only, add picots every 4th row. As the pattern reads, this edge will be fuller than the cast on picots to give it a ruffled look when draped.
Repeat Rows 1 & 2 until last HS is at peg 164 & ending on row Row 2. This row will be HS 1, EW 1.
Begin Picot Bind Off*.
*This is an alternate to my standard picot bind off just for this pattern.
**Cable CO 3, BO 4 (** rep between **,** til one st left on loom, EW 1 cut tail and pull through) See video at minute 21:14; it should start there. http://youtu.be/xicPyxHNVmQ?t=21m14s
Weave in both tails into project. If using color changing yarn be sure to weave like colored tails to closest color.
Blocking may be needed due to tension and eveness of such a large project. Do NOT steam block acrylic or it will "kill" it! Block with a light washing and let dry pinned on blocking board if needed. See bottom of pattern on Mitered Square Lovey for wet blocking instructions. http://goodknitkisses.blogspot.com/2013/07/mitered-square-picot-lovey-free-pattern.html
Notes on HS
Unlike an EW (where the working yarn is wrapped from the back between the next peg and around the front of the desired stitch/peg to the back) the HS wraps to the front between the previous peg to the front of the desired stitch/peg then between the next stich (peg).
Non-Picot shawl option: Cable Cast on 165 stitches and continue in main pattern. Do not add edge picots. Bind off in Stretchy Bind or a very loose Basic Bind off using the E-wrap stitch for knit stitches. Do not pull tight.
Happy Looming!!
Kristen
Copyright 2013, 2014 GoodKnit Kisses, Kristen Mangus. Pattern is for personal use only. Do not reproduce pattern in part or whole as written. Items may be made for personal use. Contact Kristen Mangus if you are a crafter selling individually and Kristen will give permission. kristen@goodknitkisses.com
Hello everyone! This month is a Facebook Loom Along for the Picot Layette set.
Loom knit the whole set or just what you need. The Set: A Picot Lovey (mitered square with picot optional add-on edge), Picot Booties, and a Picot Bonnet.
The set is girl centered but there are alternate to tweak for a boy or more unisex.
These patterns are written out in separate blogs and have a few video references. There are no full video loom alongs at this point. I'm finding my full time job and home life has hindered making one. However, I challenge you to stretch yourself if you find you rely on full loom along videos too much. The technique visas help demonstrate the techniques spelled out in the patterns. This blog is a quick reference to all of the patterns in the layette set.
The set was conceived by me and I partnered together with Charity, to design a mitered square that will work well for you. You can actually do this on any loom and with more stitches. This particular pattern was created to go with my Picot Layette set and was inspired by the new sock loom 2 from Authentic Knitting Board. I was privileged to get an advance preview of the loom and got so excited that I created 3 new patterns.
If you are familiar with Charity Windham's Hexagon baby blanket you will be able to make the mitered square in no time. The video for the Hexagon will help you understand the principle
Here are the pattern links below. I might create PDFs individually on Ravelry for convenience to have on your mobile device or to print off for personal use. Enjoy!
Loom- 3/8" gauge adjustable loom. KnittingBoard Sock Loom 2 used in sample. (AllnOne adjustable loom is also recommended)
Yarn: Worsted weight. Lion Brand Unforgettable color Petunia used in sample. Less than 1 skein.
K - Knit
P - Purl
FK - Flat Knit
Dcr - Decrease
St(s) - Stitch(es)
Picot CO 24 stitches in the round. Watch this video, after last peg in round knit peg 1 to connect. Row 1 will new start on peg one although it was just worked. Loom Knit Cast On: Picot Cast On http://youtu.be/MdtQZm9wUE0
Heel section: short rows on 12 pegs. Wrap 2/3 of the 12 using short row technique. (Use standard short row technique used for heels & toes) see video if you need help http://youtu.be/5e3J0fuYz-U PART 1 http://youtu.be/HDCtTqjDDPE PART 2
Row 3: FK
repeat row 3 until bootie measures 3 1/4" in length from back of heel.
Toe: Use Heel technique again then close with Kitchener stitch, Russian grafting or use decrease & drawstring method below.
Decrease by 4 stitches; adjust loom down as you go. It is suggested to place yarn on scrap yarn and adjust loom down, then place stitches back on and double peg that will decrease.
FK 1 row
Dcr by 4 sts; adjust loom
FK 1 row
Dcr by 4 sts; adjust loom
FK 1 row
Drawstring bind off
Weave in tails.
The Triple flip is a simple stitch pattern repeated until it reaches long enough to wrap around your neck 3 times and still be loose.
Loom(s): sample tested on AllnOne Knitting Board at 1 cm setting. Can use any knitting board or long loom at 3/8" gauge to 3/4" may need to adjust yarn size or number of strands to eliminate gaps. New Sock Loom 2 would be the same gauge (3/8") and smaller, less bulky loom choice for this small width pattern. The new Basic loom from KB basics kit would be nice and lightweight as well but is a slightly larger gauge (7/16").
Gauge: not important; just use an appropriate weight yarn for your loom for an ewrap stitch.
Yarn: Sport or Worsted Weight. Purple Worsted weight used in sample and was heavier for cooler weather. 2 balls of Vanna's choice used in sample. White sample is Red Heart Shimmer. It was nice and light weight.
FB - Front Board BB - Back Board CO - Cast on EW - EW Sl - slip stitch St - stitch(es)
Cast on 20 pegs in ewrap cast on in the following pattern FB: EW CO 4 pegs BB: Skip pegs 1-2. Cast on 3 pegs FB: CO 3 pegs BB: CO 3 pegs FB: CO 3 pegs BB: CO 4 pegs.
See Illustration for set up. Tech drawing courtesy of Charity Windham.
Slip 1st st of each row. EW remaining stitches. Knit till length is approximately 90" long with the working strand on the last peg (#20). Leave at least 1 yard of working strand and cut. Sample used 2 balls and ended at 500 rows of triple knit stitch (looks like 3 columns of ribs; the reverse is identical if item flips).
Bind off method options: Kitchener, Russian graft or sew.
Setup for bind off: Leave live stitches on loom. Slide knitting needle on beginning end of panel. Fasten beginning end and live ends together using Kitchener method. Can transfer loom to needles to use needle Kitchener method or choose loom method by doing the following: use scrap yarn or cable needle to move live loom stitches to front board in order of stitches. Now place beginning end of panel on back board making sure to come up through the middle of the loom and placing all 20 stitches back on the loom onto the back board.
Use loom knitting Kitchener stitch notes as below. See video link for additional help. http://youtu.be/2IBM8CbvmNo
An easier method is to use the Russian grafting technique with a crochet hook; it navigates back and front working each stitch. Use knitting needles of a smaller size than your loops just to hold the stitches. See end of the following video of the hexagon blanket for this technique. Start at minute 24:40. http://youtu.be/SZZt6cOFu2Y
As always in grafting there will be a half stitch jog. You can also sew your ends together with a tapestry needle and matching yarn.
Weave in tails.
Have fun playing with ways to wear your scarf. You can also stack them to look like a taller and thicker cowl as well or infinity scarf.
Happy Looming!
Kristen Mangus
P.S. This pattern was designed in 2012 by Kristen.
A sleek and glamorous shawl reminiscent of hairpin lace.
Change the look with a change in yarn and go from a dressy date shawl in a
shimmery yarn to a casual sock weight yarn or art yarn and wear as a keyhole
scarf!
LOOM(s):
Authentic Knitting Board All-n-One loom. Loom configured
at maximum with the 5 peg sliders on ends between the 48 peg front board &
48 peg back board. Could use alternate loom if can configure as above in
3/8" gauge. (Martha Stewart loom with 4 corner pieces and small pegs in all holes works well).
YARN:
300 yards of medium weight yarn for shawl or 200 yards if
stopping for smaller scarf. Yarn used in test is Sensations Enchantment Silver
Metallic. Other test yarns were sock weight and bulky art yarn which give a
totally different look.
FINISHED SIZE(s):
21"x60" shawl or knit 10-12" for a scarf only
Abbreviations:
EW - Ewrap
BB - Back Board of loom
FB - Front Board of loom
St - stitches
PATTERN NOTES:
We're using the back board (BB) as a place for a holding
peg to work the drop stitch and all knit stitches are worked on the front board
(FB). Do not skip pegs on FB. The sliders provide the space and no extra wraps
are needed for the drops. Plus the width of the shawl actually is the width of
the board. It's a multiple of *3 + hold*
+3
The basic pattern is ewrap 3 & Hold on BB 1 peg
behind 3rd ewrapped peg, EW 3 & hold on BB, repeat pattern till last 3
stitches and EW.
Row 1: *EW 3 on FB, wrap BB1*, repeat between *,* till
last 3 st. EW 3.
Repeat Row 1 for 100 rows to knit the maximum intended
size or till 21" measures on ends.
NOTES on Sizing:
Work in a flat panel with a turning peg (the first stitch
of each row is always slipped, meaning skip and move to peg 2) until SIDE
length measures 21" or length from nape of neck to waistline. The middle
will measure longer because of the dropped stitches weight.
For petite shawl measuring 12"x54", as on my test in the sock weight seen below, Use a multiple of 4. Cast on 3, wrap holding peg, *EW 4 on FB, wrap BB1*, repeat between *,* till last 3 st. EW 3.
This will take out a few drops and changes the sizing.
*The pattern is railroaded by knitting the length on the width of the board but one can knit fewer multiples on any loom and skip 2-5 pegs before wrapping EW to get the same results and it will effectively "turn" it to the side. You would just knit till you got the desired length. For example using a Knifty Knitter: work as a flat panel and skip enough pegs to make about a 4" drop, then wrap the next peg. Leave 3 pegs at the end to finish the row in 3 EW. Knit till desired length.
BIND OFF:
Make sure you have at least 9-10 yards left on ball or
skein to bind off (or 3.5 times the length of the loom following around the
pegs on front & back).
Loose Slip knot bind off, making sure to yarn over around
the holding pegs following the pattern it makes along the loom so bind off
matches cast on drop stitches.
*If your yarn isn very nubby you can use my stretchy bind off but you will need to add extra wraps or chains between to span the distance between the drops; this changes the look of the edge to look crocheted which was not intended.*
OPTIONAL FRINGE:
Add fringe to both shorter ends as desired OR one of the
longer sides to hang from back of shawl.
Copyright GoodKnit Kisses; do not copy, in whole or in
part, the above written pattern or video. Please link to this video or
GoodKnitKisses blog or website. Pattern itself may not be re-sold or
distributed but you may sell an item made by using this pattern.
Thank you!
Yarns used in above designs: Sensations Enchantment Silver Metallic (388 yards in ball - 300 yards used) 21"x60" full size Weight: 4 - Medium. 5 ozs. 142 gms. 388 yards. 355 meters. 92% Acrylic, 8% Polyester.
LOOM PATTERN & VIDEO ALERT! Hi everyone, I hope you're doing well!
I wanted to announce to you today that my latest pattern is up on the vivaloom.com website! It is for my Chic Retreat Cowl with a lot of visual interest and texture. There is also a LOOM ALONG VIDEO, to go along with it & help you. I'd love for you to tackle this intermediate-advanced project to learn something new and exercise your creativity knowing there is a video to aid you the whole way.
You need to be able to use a small gauge loom with ability to knit in the round 96 pegs. It was written for the All-N-One loom but you can use the Martha Stewart loom with the for corner pieces and the two longest straight pieces & small pegs in every hole.
If you want to try a stitch sampler, cast on 17 stitches. Use the chart in the pattern to guide you. It will help with technique. The 17 stitches are for the chain lace part. The crossed sections won't be totally be even on crosses but you'll get the idea.
Think of how impacting our loom knitting community could be if we all ban together to promote looming! That would be an amazing thing we could all do by going to our local Craft stores and bring some of our more unique items with looms to show to workers and passers by! It can just be you bringing your project bag at first. If it expands maybe they'll let some do their own demo table. Let's call it "Looms Occupy Craft Stores"! Or LOCS for short. LOL!!! LOCS of Love!
I could put together a video to promote it and even send mailers to people to pass out or email a PDF you could print and pass with a QR code to link to a video or my learning YouTube channel.
Let me know what you think!
Also PLEASE come request to join my Facebook closed type group mainly for loom knitters (open to needle & crochet, too!). We are on there 24/7 sharing ideas and helping each other. Here is the link. By the way it is a closed group to make our posts private to the rest of Facebook. It is also a safe zone there rated PG for my younger audience and friends. No bullying allowed. I hope you'll join us! Http://www.facebook.com/groups/LoomKnitClub
(adapted from the “Loom Knit Mesh Bag” by Kristen Mangus)
KnittingBoard All-n-One Loom (or other small gauge adjustable loom with at least 18 pegs to be made in the round). Can also be used on one end of 48" Universal S loom with wedge in place (use same number of stitches to cast on).
Skill Level: Beginner
USES: Small drawstring sachet size bag for small items or stretches for soap as a mesh.
YARN: 1 balls cotton or cotton blend (use scrap yarn less than 30 yards). Lion Brand Cotton Ease used in sample.
(Watch http://www.youtube.com/goodknitkisses for video tutorials on this bag design or SEE BELOW PATTERN POSTED)
Abbreviations: EW = E-wrap P = Purl
FLAT PANEL-
1. Set adjustable loom to 18 pegs. Using both strands of yarn E-wrap Cast on 7 stitches to loom in a flat panel. Counter clockwise to the starter peg, work as a flat panel in EW 10 rows making sure your working yarn is back to the starter peg for the next row.
BUILDING BASE OF BAG –
2. Leaving the panel on the loom, stretch the panel across the loom to the opposite side and place on pegs across. Now take the side stitches and place loops on adjacent pegs to stretch flat panel to fit on all pegs of the loom. Make sure to pick up ALL side stitches so your bag will not have an open hole. This is the bottom base of the bag. Wrap all pegs EW in a full circle and knit over leaving only 1 strands.
MAIN BODY OF BAG –
3. *Purl 2 rows
EW 5 rows* repeat *,* for a total of two sets
Purl 2 rows
EW 2 rows
BIND OFF –
4. Loose Bind off - This is similar to the Basic bind off. However, after each stitch moved over, and knit off, wrap the peg and knit off again before moving over. Begin Basic Bind off by wrapping the first leading peg & knitting off. (See GoodKnitKisses video tutorial for help)
DRAWSTRING –
5. Using a size I, J or K crochet hook, chain 50. Do not tie yet.
Weave the chain into the top of the bag between the knit stitch columns, just below the cast off . Weave back and forth between the outside and inside of the bag till you come to the beginning end. Tie the ends together and weave tail into the chain or simply cut off. The tied in can be repositioned into the inside of the bag if you like. Weave in all loose strands. Drawstring to close.
See end of review video for cast off at about 10 minute mark. For now till new video made.
USES:
Use as a sachet for potpourri or scented candle chips, feminine hygiene packet for purse or bag, other small items. Can stretch to use as a soap bar bag.